Answers To A Couple Of Problems Your Air Compressor May Experience
Having the right tool available to you is an essential part of doing your job, and there are many tools that rely on compressed air to properly function. For these devices, an air compressor is an essential device to own, but there are a variety of problems an air compressor may encounter as a result of the tremendous strains and stress that it will be subjected to during use. Not surprisingly, you might need a couple of questions addressed when routine issues arise with your air compressor.
Why Does The Air Compressor Stop Working After A Few Minutes?
This is a particularly common problem that can be traced to a number of potential issues with the air compressor. One of the most common and easiest to repair is a clogged intake vent. If the compressor is not able to get enough air, it will overheat and stop working. By simply removing the clog from the vent, this problem should stop if this is the root of the problem.
When this fails to correct the problem, another routine cause of this issue is a lack of oil. When the oil runs low, excessive heat will be generated, and this can cause the system to temporarily shut off and suffer major damage. By checking the oil level, you will be able to quickly determine whether this is the cause of the problem. If neither of these issues is causing the problem, you will likely need to have a professional inspect the system to determine what needs to be done to stop this problem.
What Causes The Compressor's Belts To Fail Prematurely?
In addition to the device shutting off at inconvenient times, another routine problem that you might encounter is excessive wear on the compressor's belts. As these belts wear down, they will become far more likely to suffer a catastrophic failure, which could result in the belts snapping when the device is being used.
Sadly, this can become a routine problem if you have failed to keep your compressor's motor properly serviced. As time passes, the vibrations from using the air compressor will cause the pulleys and gears in the device to start to come out of alignment. This misalignment can cause the belts to suffer rapid stretching and thinning, but you can help avoid these issues by having the compressor serviced by a trained professional. These individuals have the training and tools needed to ensure that your compressor is in perfect working condition when you need it. To learn more, see this website.